tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com saw filter 2017.5mhz 15 mhz bw smd 1.4x1.1 mm model no.:TA1126A rev. no.:2 a. maximum rating: 1. input power level: 10 dbm 2. dc voltage : 3v 3. operating temperatur e: -30c to +85c 4. storage temperature: -40c to +95c b. electrical characteristics : terminating source impedance (single-ended) : zs = 50 [ terminating load impedance (single-ended) : z l = 50 [ item unit min. type. max. note center frequency fc mhz - 2017.5 - - insertion loss (2010~2025 mhz) il db - 1.3 2.1 - a mplitude ripple (2010~2025 mhz) db - 0.2 1 - vswr (2010~2025 mhz) - 1.2 1.9 - attenuation 1~1020 mhz db 26 29 - - 1220~1570 mhz db 20 30 - - 1570~1590 mhz db 30 32 - - 1590~1820 mhz db 20 34 - - 1820~1850 mhz db 31 36 - - 1850~1950 mhz db 20 28 - - 2085~2400 mhz db 19 27 - - 2400~2430 mhz db 29 32 - - 2430~2790 mhz db 25 32 - - 2790~2820 mhz db 30 36 - - 2820~3000 mhz db 25 38 - - 3000~4010 mhz db 20 36 - - 4010~4060 mhz db 25 35 - - 4060~6000 mhz db 10 25 - - rohs compliant lead free lead-free soldering
tai-saw technology co., ltd. 3 tst dcc release document c.outline drawing: ?? : year/month code (follow the table) year/month 1 2 3 4 5 6 7 8 9 10 11 12 2013 a b c d e f g h j k l m 2014 n p q r s t u v w x y z 2015 a b c d e f g h j k l m 2016 n p q r s t u v w x y z 2017 a b c d e f g h j k l m 2018 n p q r s t u v w x y z 2019 a b c d e f g h j k l m 2020 n p q r s t u v w x y z d. measurement circuit: c : input a : output b,d,e : ground unit : mm v ?? top view bottom view side view
tai-saw technology co., ltd. 4 tst dcc release document e. frequency characteristics :
tai-saw technology co., ltd. 5 tst dcc release document
tai-saw technology co., ltd. 6 tst dcc release document f. packing : 1. reel dimension (reel count : 7?=3000 ) 2.tape dimension direction of feed v ??
tai-saw technology co., ltd. 7 tst dcc release document g. recommended reflow profile : 1. preheating shall be fixed at 150~180 j for 60~90 seconds. 2. ascending time to preheating temperature 150 j shall be 30 seconds min. 3. heating shall be fixed at 220 j for 50~80 seconds and at 245~260 j peak (min. 10sec). 4. time : 2 times.
|
